STA400MB series water-based inks

STA400MB series water-based inks are primarily used for non-absorbent PTP aluminum foil, by using gravure printing. In pharmaceutical packaging, such inks ensure packaging quality and drug safety while meeting environmental standards.

 

 

Product Features：

 

l Low VOCs, compliant, and non-toxic.

l Strong adhesion and good high-temperature resistance (180℃～220℃).

l Excellent water resistance, abrasion resistance, scratch resistance, anti-blocking and other properties.

l Suitable for printing requirements of water-based plates (depth 28～32μm), solvent-based plates (40～50μm) and machine speeds (50-150m/min).

 

Applicable to:

 

l Gravure Printing Presses

 

Technical Parameters:

 

l Machine Viscosity：10-18 seconds (#3 Zahn Cup at 25℃)

l PH Value：7.5-8.5

 

Usage and Cautions：

 

l Stir thoroughly before use to ensure uniform composition of the ink composition.

Adjust viscosity, PH value, drying speed, etc., by using the company’s matching additives according to printing process requirements.
After opening, the remaining ink should be promptly sealed tightly with the bucket lid to prevent skinning or dust contamination.
Used varnish should be stored separately from unused varnish with clear labeling. It is recommended to filter through a 120-mesh screen before reuse.
Storage temperature: 15-25℃. Keep containers tightly sealed and away from heat and direct sunlight.

Note：

Our company can provide four-color inks, PANTONE basic colors, and custom special colors as required by customers.